• <td id="skwky"></td>
  • <td id="skwky"><source id="skwky"></source></td>

    專業生產換熱器,板式換熱器,螺旋板換熱器,歡迎來到換熱器網!

    設為主頁 | 加入收藏 | 企業郵箱

    2 1

    新聞中心

    聯系我們Contact us

    聯系人: 肖經理

    手機: 15861401881

    電話:0510-85186280
    傳真:0510-85180342
    郵編:214133
    網址:www.yybnkj.com
    郵箱:xmq881210@163.com


     

    新聞中心

    您當前的位置:首頁>>新聞中心

    螺旋板換熱器的安裝

    螺旋板換熱器的安裝小易為你介紹一下。

    螺旋板換熱器頭蓋組件的安裝:
    1、將換熱器升降臺的工作機架降至地面,通過鎖緊環接板頭蓋組件固定在專用工作機架的機頭法蘭盤上,利用加減支架配重調節平衡位置,直至水平。
    2、將換熱器工作機架和頭蓋組件一起吊起,調整其水平度,使其軸線與筒體軸線大致成一直線對中后,小心靠近管箱端面。
    3、轉動頭蓋組件直至管箱螺紋導向入口和螺紋鎖緊環相旋合后,再緩慢旋入至原始位置。在旋進的過程中盡量控制好換熱器頭蓋組件與殼體的同心度、垂直度,以減少安裝阻力

    英文:

    The installation of spiral plate heat exchanger is easy to introduce for you.

    Installation of head cover assembly of spiral plate heat exchanger:

    1. The working frame of the heat exchanger elevator is lowered to the ground. The head flange of the special working frame is fixed by locking the ring plate head cover assembly. The balance position is adjusted by adding or subtracting the weight of the bracket until it reaches the level.

    2. Lift the working rack of heat exchanger and the head cover assembly together, adjust its level, align the axes of heat exchanger with the axes of cylinder roughly in a straight line, and approach the end face of tube box carefully.

    3. Turn the head cover assembly until the threaded guide inlet of the tube box and the threaded locking ring are rotated together, then slowly rotate into the original position. Controlling the concentricity and verticality of heat exchanger head cover assembly and shell as far as possible in the process of screwing in order to reduce installation resistance

    啦啦彩